Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Niu, Meng
Affiliations: College of Engineering, Caofeidian Polytechnic, Tangshan, Hebei 063200, China | E-mail: [email protected]
Correspondence: [*] Corresponding author: College of Engineering, Caofeidian Polytechnic, Tangshan, Hebei 063200, China. E-mail: [email protected].
Abstract: Electrical device automation in smart industries assimilates machines, electronic circuits, and control systems for efficient operations. The automated controls provide human intervention and fewer operations through proportional-integral-derivative (PID) controllers. Considering these devices’ operational and control loop contributions, this article introduces an Override-Controlled Definitive Performance Scheme (OCDPS). This scheme focuses on confining machine operations within the allocated time intervals preventing loop failures. The control value for multiple electrical machines is estimated based on the operational load and time for preventing failures. The override cases use predictive learning that incorporates the previous operational logs. Considering the override prediction, the control value is adjusted independently for different devices for confining variation loops. The automation features are programmed as before and after loop failures to cease further operational overrides in this process. Predictive learning independently identifies the possibilities in override and machine failures for increasing efficacy. The proposed method is contrasted with previously established models including the ILC, ASLP, and TD3. This evaluation considers the parameters of uptime, errors, override time, productivity, and prediction accuracy. Loops in operations and typical running times are two examples of the variables. The learning process results are utilized to estimate efficiency by modifying the operating time and loop consistencies with the help of control values. To avoid unscheduled downtime, the discovered loop failures modify the control parameters of individual machine processes.
Keywords: Control loop, electrical automation, override control, PID, predictive learning
DOI: 10.3233/IDT-230125
Journal: Intelligent Decision Technologies, vol. Pre-press, no. Pre-press, pp. 1-16, 2023
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]