Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Kumar,, Anoop | Varun, | Kumar, Prashant | Singal, S.K.
Affiliations: Mechanical Engineering Department, National Institute of Technology, Hamirpur–177005 (India) | AHEC, IIT-Roorkee, Roorkee–247667 (India)
Note: [] Corresponding Author. E-mail: [email protected]
Abstract: Venturi scrubbers are devices where particle-laden gas (air) is cleaned of particles by capture on water drops. A high relative velocity at throat between drops and particles moving with gas enhances capture of particles. The present model estimates penetration (fraction of un-collected particles) of small particles (less than 3 mm) in intermediate drop Reynolds number (1 < ReD < 1000). In this model of venturi scrubber where intermediate drop Reynolds number effects are accounted for show reasonably good agreement with available experimental data. Venturi scrubber is found to be effective in capture of such small particles at high throat gas velocities (80 m/s and higher).
Keywords: Particle capture, penetration, venturi scrubber , wet scrubbing, inertial impaction
Journal: Asian Journal of Water, Environment and Pollution, vol. 6, no. 2, pp. 7-13, 2009
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]