Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Purchase individual online access for 1 year to this journal.
Price: EUR 315.00Impact Factor 2023: 2
The purpose of the Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology is to foster advancements of knowledge and help disseminate results concerning recent applications and case studies in the areas of fuzzy logic, intelligent systems, and web-based applications among working professionals and professionals in education and research, covering a broad cross-section of technical disciplines.
The journal will publish original articles on current and potential applications, case studies, and education in intelligent systems, fuzzy systems, and web-based systems for engineering and other technical fields in science and technology. The journal focuses on the disciplines of computer science, electrical engineering, manufacturing engineering, industrial engineering, chemical engineering, mechanical engineering, civil engineering, engineering management, bioengineering, and biomedical engineering. The scope of the journal also includes developing technologies in mathematics, operations research, technology management, the hard and soft sciences, and technical, social and environmental issues.
Authors: Mohan, M. | Tamizhazhagan, V. | Balaji, S.
Article Type: Research Article
Abstract: Cloud computing is a new technology that provides services to customers anywhere, anytime, under varying conditions and managed by a third-party cloud provider. Even though cloud computing has progressed a lot, some attacks still happen. The recent anomalous and signature attacks use clever strategies such as low-rate attacks and attacking as an authenticated user. In this paper, a novel Attack Detection and Prevention (ADAPT) method is proposed to overcome this issue. The proposed system consists of three stages. An Intrusion Detection System is initially used to check whether there is an attack or not by comparing the IP address in …the Blacklist IP Database. If an attack occurs, the IP address will be added to the Blacklist IP database and blocked. The second stage uses Bi-directional LSTM and Bi-directional GRU to check the anomalous and signature attack. In the third stage, classified output is sent to reinforcement learning, if any attack occurs the IP address is added to the blacklist IP database otherwise the packets are forwarded to the user. The proposed ADAPT technique achieves a higher accuracy range than existing techniques. Show more
Keywords: Cloud computing, Bi-directional LSTM, Bi-directional GRU, IP address, and reinforcement learning
DOI: 10.3233/JIFS-236371
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-10, 2024
Article Type: Research Article
Abstract: A consistency fuzzy set is composed of mean values and consistency degrees of fuzzy sequences in the transformation process of a fuzzy multiset (FM), but lacks confidence intervals in relation to a confidence level of fuzzy sequences, which shows its deficiency. To solve this deficiency, this paper aims to propose an improved transformation approach from FM to a confidence consistency fuzzy cubic set (CCFCS) and to develop an exponential similarity measure of CCFCSs for modeling piano performance evaluation (PPE) in a FM scenario. Consequently, this study includes the following context. First, a transformation approach from FM to CCFCS is proposed …in terms of mean values, consistency degrees (the complement of standard deviation), and confidence intervals of fuzzy sequences subject to a confidence level and normal distribution. Second, the exponential similarity measure of CCFCSs is proposed in the scenario of FMs. Third, a PPE model is developed based on the proposed similarity measure of CCFCSs in the FM scenario. Finally, the developed model is applied to a piano performance competition organized by Shaoxing University in China as an actual evaluation example, and then the rationality and validity of the proposed model in the scenario of FMs are verified through sensitivity and comparison analysis. Show more
Keywords: Fuzzy multiset, confidence consistency fuzzy cubic set, exponential similarity measure, confidence level, piano performance evaluation
DOI: 10.3233/JIFS-235084
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-10, 2024
Authors: Zakaria, Aliya Syaffa | Shafi, Muhammad Ammar | Mohd Zim, Mohd Arif | Musa, Aisya Natasya
Article Type: Research Article
Abstract: Lung cancer constituted 12.2% of newly diagnosed cancer cases globally in 2020. The high fatality rate of the condition is attributed to delayed diagnosis and inadequate symptom recognition. In Malaysia, the incidence of lung cancer is estimated to be 1 in 60 males and 1 in 138 females, with a median age of 70 years or above. Most lung cancer cases were detected during advanced stages, specifically stages III and IV, with a prevalence exceeding 90% for both genders. In Malaysia, most patients are diagnosed in stages III and IV, which are associated with a lower likelihood of long-term survival. …Many cases are identified at a late stage, characterized by significant tumor expansion or the spread of cancer cells to areas that cannot be treated surgically. Malaysians are unaware of cancer symptoms; hence the situation is common. To improve survival and reduce mortality, Malaysians must recognize the symptoms of lung cancer. Fuzzy linear regression and multiple linear regression models have been compared to predict high-risk lung cancer symptoms in Malaysia. The fuzzy linear regression model analyses secondary data, eliminates irrelevant information and enhances precision in the results. Lung cancer patients at Al-Sultan Abdullah Hospital (UiTM Hospital) in Selangor provided data for this study. Data from 124 lung cancer patients were analyzed using Microsoft Excel, SPSS, and MATLAB. To improve data accuracy, the study used cross-validation measurement error (MSE and RMSE). According to data analysis, hemoptysis and chest pain are high-risk symptoms with MSE and RMSE values of 1.549 and 1.245, respectively. Show more
Keywords: Lung cancer, symptoms of lung cancer, fuzzy linear regression, prediction data, statistical error
DOI: 10.3233/JIFS-233714
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-10, 2024
Authors: Tian, Huaqiang | Yu, Long | Tian, Shengwei | Long, Jun | Zhou, Tiejun | Wang, Bo | Li, Yuhuan
Article Type: Research Article
Abstract: A spect-B ased S entiment A nalysis (ABSA ) has been the focus of increasing study in recent years. Previous research has demonstrated that incorporating syntactic information, such as dependency trees, can enhance ABSA performance. Despite the widespread use of metaphors in daily life to express emotions more vividly, few studies have integrated this literary device into ABSA. In this paper, we propose a novel ABSA model that utilizes M etaphor I dentification P rocedure (MIP ) to encode both the sentence and aspect word as a single unit, thereby overcoming these limitations. Our experimental results demonstrate that our …model achieves competitive performance in ABSA. Show more
Keywords: Aspect-based sentiment analysis, metaphorical sentiment analysis, transformer, deep learning
DOI: 10.3233/JIFS-233077
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-10, 2024
Authors: Yuan, Weijin | Deng, Yunfeng
Article Type: Research Article
Abstract: This paper improves the visual change-based personnel evacuation model by considering the evacuees’ gravity. Specifically, first, the new model incorporates the gravity formula in the model’s mechanic part to consider the influence of gravity. Second, the new model involves rules for determining the visual range of personnel moving in the stairwell. Third, the proposed model investigates the influence of the angle and width of the stairwell, the number of people, and other factors during personnel evacuation under the influence of gravity. The model is developed in Python and is compared with actual results, revealing that the proposed model is more …realistic considering the evacuation time compared to current models. Indeed, under a fixed number of people, when the stairwell angle is less than 34°, the evacuation time decreases as the angle increases, and when the stairwell angle exceeds 34°, the evacuation time is almost unchanged. Additionally, under a fixed number of evacuees, the evacuation time decreases as the width of the stairwell increases, and due to stairwell width space redundancy, the evacuation time tends to stabilize. The results of the new model research provide reference for the design of building safety evacuation, thereby improving the safety of buildings. Show more
Keywords: Stair angle, stair width, view, pedestrian evacuation
DOI: 10.3233/JIFS-236008
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2024
Authors: Li, Yaqin | Zhang, Ziyi | Yuan, Cao | Hu, Jing
Article Type: Research Article
Abstract: Traffic sign detection technology plays an important role in driver assistance systems and automated driving systems. This paper proposes DeployEase-YOLO, a real-time high-precision detection scheme based on an adaptive scaling channel pruning strategy, to facilitate the deployment of detectors on edge devices.More specifically, based on the characteristics of small traffic signs and complex background, this paper first of all adds a small target detection layer to the basic architecture of YOLOv5 in order to improve the detection accuracy of small traffic signs.Then, when capturing specific scenes with large fields of view, higher resolution and richer pixel information are preserved instead …of directly scaling the image size.Finally, the network structure is pruned and compressed using an adaptive scaling channel pruning strategy, and the pruned network is subjected to a secondary sparse pruning operation. The number of parameters and computations is greatly reduced without increasing the depth of the network structure or the influence of the input image size, thus compressing the model to the minimum within the compressible range.Experimental results show that the model trained by Experimental results show that the model trained by DeployEase-YOLO achieves higher accuracy and a smaller size on TT100k, a challenging traffic sign detection dataset.Compared to existing methods, DeployEase-YOLO achieves an average accuracy of 93.3%, representing a 1.3% improvement over the state-of-the-art YOLOv7 network, while reducing the number of parameters and computations to 41.69% and 59.98% of the original, respectively, with a compressed volume of 53.22% of the previous one.This proves that the DeployEase-YOLO has a great deal of potential for use in the area of small traffic sign detection.The algorithm outperforms existing methods in terms of accuracy and speed, and has the advantage of a compressed network structure that facilitates deployment of the model on resource-limited devices. Show more
Keywords: Small target, deep learning, model compression, traffic sign detection
DOI: 10.3233/JIFS-235135
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-14, 2024
Authors: Özlü, Şerif | Al-Quran, Ashraf | Riaz, Muhammad
Article Type: Research Article
Abstract: This paper aims to present Bipolar valued probabilistic hesitant fuzzy sets (BVPHFSs) by combining bipolar fuzzy sets and probabilistic hesitant fuzzy sets (PHFSs). PHFSs are a strong version of hesitant fuzzy sets (HFSs) in terms of evaluated as probabilistic of each element. Probabilistic hesitant fuzzy sets (PHFSs) are a set structure that argues that each alternative should be evaluated probabilistically. In this framework, the proposed cluster allows probabilistic evaluation of decision- makers’ opinions as negative. Thus, this case proposes flexibility about selection of an element and aids to overcome with noise channels. Furthermore, some new aggregation operators are discussed called …bipolar valued probabilistic hesitant fuzzy weighted average operator (BVPHFWA), Generalized bipolar valued probabilistic hesitant fuzzy weighted average operator (GBVPHFWA), bipolar valued probabilistic hesitant fuzzy weighted geometric operator (BVPHFWG), Generalized bipolar valued probabilistic hesitant fuzzy weighted geometric operator (GBVPHFWG), bipolar valued probabilistic hesitant fuzzy hybrid weighted arithmetic and geometric operator (BVPHFHWAG) and Generalized bipolar valued probabilistic hesitant fuzzy hybrid weighted arithmetic and geometric (GBVPHFHWAG) and some basic properties are presented. A score function is defined ranking alternatives. Moreover, two different algorithms are put forward with helping to TOPSIS method and by using aggregation operators over BVPHFSs. The validity of proposed operators are analyzed with an example and results are compared in their own. Show more
Keywords: Probabilistic hesitant fuzzy sets, bipolar valued probabilistic hesitant fuzzy sets, generalized hybrid operators, decision-making
DOI: 10.3233/JIFS-238331
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-20, 2024
Authors: Wang, Chishe | Li, Jun | Wang, Jie | Zhao, Weikang
Article Type: Research Article
Abstract: Rapid urbanization has made road construction and maintenance imperative, but detecting road diseases has been time-consuming with limited accuracy. To overcome these challenges, we propose an efficient YOLOv7 road disease detection model. Our approach involves integrating MobilieNetV3 as the backbone feature extraction network to reduce the network’s parameters and computational requirements. Additionally, we introduce the BRA attention module into the spatial pyramid pooling module to eliminate redundant information and enhance the network’s feature representation capability. Moreover, we utilize the F-ReLU activation function in the backbone network, expanding the convolutional layers’ receptive field range. To optimize the model’s boundary loss, we …employ the Wise-IoU loss function, which places more emphasis on the quality of ordinary samples and enhances the overall performance and generalization ability of the network. Experimental results demonstrate that our improved detection algorithm achieves a higher recall rate and mean average precision (mAP) on the public dataset (RDD) and the NJdata dataset in Nanjing’s urban area. Specifically, compared to YOLOv7, our model increases the recall rate and mAP on RDD by 3.3% and 2.6%, respectively. On the NJdata dataset, our model improves the recall rate and mAP by 1.9% and 1.3%, respectively. Furthermore, our model reduces parameter and computational requirements by 30% and 22.5%, respectively, striking a balance between detection accuracy and speed. In conclusion, our road disease detection model presents an effective solution to address the challenges associated with road disease detection in urban areas. It offers improved accuracy, efficiency, and generalization capabilities compared to existing models. Show more
Keywords: Yolov7, lightweight, MobilieNetV3, BRA, F-ReLU, Wise-IoU
DOI: 10.3233/JIFS-239289
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-17, 2024
Authors: Ratmele, Ankur | Thakur, Ramesh
Article Type: Research Article
Abstract: As more people express their thoughts on products on various online shopping platforms, the feelings expressed in these opinions are becoming a significant source of information for marketers and buyers. These opinions have a big impact on consumers’ decision to buy the best quality product. When there are too many features or a small number of records to analyze, the decision-making process gets difficult. A recent stream of study has used the conventional quantitative star score ratings and textual content reviews in this context. In this research, a decision-making framework is proposed that relies on feature-based opinions to analyze the …textual content of reviews and classify buyer’s opinions, thereby assisting consumers in making long-term purchases. The framework is proposed in this paper for product purchase decision making based on feature-based opinions and deep learning. Framework consists of four components: i) Pre-processing, ii) Feature extraction, iii) Feature-based opinion classification, and iv) Decision-making. Web scraping is used to obtain the dataset of Smartphone reviews, which is subsequently clean and pre-processed using tokenization and POS tagging. From the tagged dataset, noun labeled words are retrieved, and then the probable product’s features are extracted. These feature-based sentences or reviews are processed using a word embedding to generate review vectors that identify contextual information. These word vectors are used to construct hidden vectors at the word and sentence levels using a hierarchical attention method. With respect to each feature, reviews are divided into five classes: extremely positive, positive, extremely negative, negative, and neutral. The proposed method may readily detect a customer’s opinion on the quality of a product based on a certain attribute, which is beneficial in making a purchase choice. Show more
Keywords: Opinions, Opinion Extraction (OE), product features, decision making, hierarchical attention mechanism, GloVe
DOI: 10.3233/JIFS-235389
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2024
Authors: Ding, Yahui | Wang, Hongjuan | Liu, Nan | Li, Tong
Article Type: Research Article
Abstract: Traditional Chinese painting (TCP), culturally significant, reflects China’s rich history and aesthetics. In recent years, TCP classification has shown impressive performance, but obtaining accurate annotations for these tasks is time-consuming and expensive, involving professional art experts. To address this challenge, we present a semi-supervised learning (SSL) method for traditional painting classification, achieving exceptional results even with a limited number of labels. To improve global representation learning, we employ the self-attention-based MobileVit model as the backbone network. Furthermore, We present a data augmentation strategy, Random Brushwork Augment (RBA), which integrates brushwork to enhance the performance. Comparative experiments confirm the effectiveness of …TCP-RBA in Chinese painting classification, demonstrating outstanding accuracy of 88.27% on the test dataset, even with only 10 labels, each representing a single class. Show more
Keywords: Traditional chinese paintings, brushwork, semi-supervised learning, image classification
DOI: 10.3233/JIFS-236533
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-11, 2024
Authors: You, Miaona | Zhuang, Sumei | Luo, Ruxue
Article Type: Research Article
Abstract: This study proposes a weighted composite approach for grey relational analysis (GRA) that utilizes a numerical weather prediction (NWP) and support vector machine (SVM). The approach is optimized using an improved grey wolf optimization (IGWO) algorithm. Initially, the dimension of NWP data is decreased by t-distributed stochastic neighbor embedding (t-SNE), then the weight of sample coefficients is calculated by entropy-weight method (EWM), and the weighted grey relational of data points is calculated for different weather numerical time series data. At the same time, a new weighted composite grey relational degree is formed by combining the weighted cosine similarity of NWP …values of the historical day and to be measured day. The SVM’s regression power prediction model is constructed by the time series data. To improve the accuracy of the system’s predictions, the grey relational time series data is chosen as the input variable for the SVM, and the influence parameters of the ideal SVM are discovered using the IGWO technique. According to the simulated prediction and analysis based on NWP, it can be observed that the proposed method in this study significantly improves the prediction accuracy of the data. Specifically, evaluation metrics such as root mean squared error (RMSE), regression correlation coefficient (r 2 ), mean absolute error (MAE) and mean absolute percent error (MAPE) all show corresponding enhancements, while the computational burden remains relatively low. Show more
Keywords: t-SNE, power forecasting, IGWO, NWP
DOI: 10.3233/JIFS-237333
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-16, 2024
Authors: Amsaprabhaa, M.
Article Type: Research Article
Abstract: Human pose recognition from videotapes has become an emerging research topic for tracking human movements. The objective of this work is to develop a deep multimodal Spatio-Temporal Harris Hawk Optimized Pose Recognition (STHHO-PR) framework for self-learning fitness exercises. The presented STHHO-PR framework uses audio modality and visual modality to classify the different poses. In audio modality, the VGG-16 network paradigm is used to extract the audio traits for fitness pose recognition. In visual modality, Harris Hawks Optimization (HHO) along with the Minimum Cross Entropy (MCE) method is employed to find out the optimum threshold values for body parts segmentation. These …segmented body parts highlight the human joint points that are connected through the skeletonization process to extract the skeletal information. The extracted spatio-temporal features from audio modality and visual modality are optimally fused and used in the classification process. Weighted Majority Voting Ensemble (WMVE) classifier is adopted to build the classification model. This work is experimented with yoga videos acquired from publicly available datasets. The results show that the presented STHHO-PR framework outperforms other state-of-art procedures in terms of prediction accuracy. Show more
Keywords: Harris Hawks Optimization, Minimum Cross Entropy, Weighted Majority Voting Ensemble classifier, yoga video, yoga poses classification
DOI: 10.3233/JIFS-233286
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-23, 2024
Authors: Li, Zheming | Chen, Yidan | Yang, Bo | Li, Chenwei | Zhang, Shihua | Li, Wei | Zhang, Hengwei
Article Type: Research Article
Abstract: Abstract Adversarial examples are often used to test and evaluate the security and robustness of image classification models. Though adversarial attacks under white-box setting can achieve a high attack success rate, due to overfitting, the success rate of black-box attacks is relatively low. To this end, this paper proposes diversified input strategies to improve the transferability of adversarial examples. In this method, various transformation methods are applied to randomly transform the original image multiple times, thereby generating a batch of transformed images. Then, in the process of back-propagation, the loss function gradient of the transformed images is calculated, and a weighted …average of the obtained gradient values is performed to generate adversarial perturbation, which is iteratively added to the original image to generate adversarial examples. Meanwhile, by increasing the variety of data augmentation transformation types and the number of input images, the proposed method effectively alleviates overfitting and improves the transferability of adversarial examples. Extensive experiments on the ImageNet dataset indicate that the proposed method can perform black-box attacks better than benchmark methods, with an average of 97.2% success rate attacking multiple models simultaneously. Show more
Keywords: Deep neural network, image classification, adversarial examples, black-box attacks, diversified input
DOI: 10.3233/JIFS-223584
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2024
Authors: Lan, Zhiqiang | Wu, Guoyao | Wu, Jiacheng | Li, Jiaqi | Pan, Fan
Article Type: Research Article
Abstract: In the application of new energy consumption system engineering, in order to evaluate the contribution of electric power industry expansion, an evaluation model of electric power industry expansion contribution considering the influencing factors of new energy consumption is constructed. In the process of power industry expansion, the growth of new energy installed capacity, power system regulation ability, power grid interconnection and electricity demand are the core factors that affect the change of power contribution to power industry expansion. Using the characteristic extraction method of power consumption behavior of users with industrial expansion, after extracting two characteristics, namely, the utilization hours …of user’s industrial expansion capacity and the proportion of new energy load put into operation under the change of four major factors, the monthly industrial expansion power consumption of typical users is predicted by the monthly industrial expansion power consumption forecasting method of users considering industrial expansion capacity, and then the growth curve of user’s industrial expansion power consumption is drawn. Based on the forecast method of monthly industry expansion electricity generated by industry expansion quantity, the industry expansion quantity of typical individual users is calculated, and the industry expansion quantity is input into RBF network model trained by particle swarm optimization algorithm to complete the forecast of monthly industry expansion electricity; Finally, the contribution ratio of each influencing factor is calculated, and the evaluation of power industry expansion contribution considering the influencing factors of new energy consumption is completed. After testing, this model can be used as an available model for evaluating the contribution of electric power industry under the condition of considering the influencing factors of new energy consumption. Show more
Keywords: New energy consumption, influencing factors, power industry expansion, contribute electricity, evaluation model, industry expansion capacity
DOI: 10.3233/JIFS-236907
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-12, 2024
Authors: Song, Can
Article Type: Research Article
Abstract: The development and utilization of network big data is also accompanied by data theft and destruction, so the monitoring of network security is particularly important. Based on this, the study applies the fuzzy C-mean clustering algorithm to the network security model, however, the algorithm has major defects in discrete data processing and the influence of feature weights. Therefore, the study introduces the concept of local density and optimizes the initial clustering center to solve its sensitive defects as well as empirical limitations; at the same time, the study introduces the adaptive methods of fuzzy indicators and feature weighting, and uses …the concepts such as fuzzy center-of-mass distribution to avoid problems such as the model converging too fast and not being able to handle discrete data. Finally, the study does a simulation analysis of the performance of each module, and the comparison of the overall algorithm with the rest of the models. The experimental results show that in the comparison of the overall algorithm, its false detection rate decreases by 8.57% in the IDS Dataset dataset, compared to the particle swarm algorithm. Therefore, the adaptive weighted fuzzy C-Means algorithm based on local density proposed in the study can effectively improve the network intrusion detection performance. Show more
Keywords: Local density, fuzzy clustering, adaptive, hybrid weighting, network security
DOI: 10.3233/JIFS-235082
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2024
Authors: Duan, Chunyan | Zhu, Mengshan | Wang, Kangfan
Article Type: Research Article
Abstract: Along with the booming of intelligent manufacturing, the reliability management of intelligent manufacturing systems appears to be becoming more significant. Failure mode and effects analysis (FMEA) is a prospective reliability management instrument extensively utilized to manage failure modes of systems, products, processes, and services in various industries. However, the conventional FMEA method has been criticized for its inherent limitations. Machine learning can handle large amounts of data and has merits in reliability analysis and prediction, which can help in failure mode classification and risk management under limited resources. Therefore, this paper devises a method for complex systems based on an …improved FMEA model combined with machine learning and applies it to the reliability management of intelligent manufacturing systems. First, the structured network of failure modes is constructed based on the knowledge graph for intelligent manufacturing systems. Then, the grey relation analysis (GRA) is applied to determine the risk prioritization of failure modes. Hereafter, the k-means algorithm in unsupervised machine learning is employed to cluster failure modes into priority classes. Finally, a case study and further comparative analysis are implemented. The results demonstrate that failure modes in system security, production quality, and information integration are high-risk and require more resources for prevention. In addition, recommendations for risk prevention and monitoring of intelligent manufacturing systems were given based on the clustering results. In comparison to the conventional FMEA method, the proposed method can more precisely capture the coupling relationship between the failure modes compared with. This research provides significant support for the reliability and risk management of complex systems such as intelligent manufacturing systems. Show more
Keywords: Failure mode and effects analysis, reliability analysis, intelligent manufacturing systems, machine learning
DOI: 10.3233/JIFS-232712
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-18, 2024
Authors: Cui, Hongzhen | Zhang, Longhao | Zhu, Xiaoyue | Guo, Xiuping | Peng, Yunfeng
Article Type: Research Article
Abstract: Extracting and digitizing drug attributes from medical literature is the first step to build a knowledge computing system for precision disease treatment. In order to build a cardiovascular drug knowledge base, this paper proposes a multi-label text classification method for cardiovascular drug attributes from the Chinese drug guideline. The drug attributes are characterized by a BERT pre-trained model, and a dual-feature extraction structure is proposed based on the BiGRU neural network to capture high-level semantic information. Label categorization of cardiovascular drug attributes, such as indications and mode of administration, is accomplished. The F1 score of 0.8431 was obtained using 5-fold …cross-validation. Comparing KNN and Naïve bayes, and conducting CNN and BiGRU control experiments on the basis of Word2Vec characterization of medication guidelines, the proposed multi-label text classification method is effective and the F1 value is significantly improved. Proved by analysis of ablation and crossover experiments, the proposed method can achieve a high accuracy rate averaged at 0.8339. Show more
Keywords: Multi-label text classification, cardiovascular drug attributes, BERT, BiGRU, dual feature extraction
DOI: 10.3233/JIFS-236115
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-11, 2024
Authors: Zhang, Bei | Cao, Yuan | Wang, Changqing | Wang, Meng
Article Type: Research Article
Abstract: To address the challenges of dense scenarios with densely distributed small-scale faces, severe occlusions, and unclear features leading to inaccurate detection and high miss rates, we propose a lightweight small-scale face detection algorithm based on YOLOv5. The aim is to enhance the accuracy and precision of target detection. Firstly, we introduce the Convolutional Block Attention Module (CBAM) into the existing backbone network, obtaining more detailed features by comprehensively considering both spatial and channel dimensions. Next, in the Neck network, we embed involution to enhance channel information and weight distribution. Finally, a new feature fusion layer is added to improve the …capture capability of feature information for smaller pixels and smaller targets in visible areas by integrating deep semantic information with shallow semantic information. The experimental results demonstrate that the improved model exhibits an increase in the average precision across all three subsets of the public WIDER FACE dataset, with improvements of 3.2%, 3.4%, and 2.6% respectively. The detection frame rate reaches 87 frames per second (FPS), significantly enhancing the detection performance of facial targets. This improvement meets the accuracy and real-time requirements for detecting small-scale facial targets in dense scenarios. Show more
Keywords: Dense scenarios, small-scale faces, CBAM, involution, feature fusion layer
DOI: 10.3233/JIFS-238575
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-13, 2024
Authors: Maddali, Deepika
Article Type: Research Article
Abstract: A rising number of edge devices, like controllers, sensors, and robots, are crucial for Industrial Internet of Things (IIoT) networks for collecting data for communication, storage, and processing. The security of the IIoT could be compromised by any malicious or unusual behavior on the part of any of these devices. They may also make it possible for malicious software placed on end nodes to enter the network and perform unauthorized activities. Existing anomaly detection techniques are less effective due to the increasing diversity of the network and the complexity of cyberattacks. In addition, most strategies are ineffective for devices with …limited resources. Therefore, this work presents an effective deep learning based Malware Detection framework to make the edge based IIoT network more secure. This multi-stage system begins with the Deep Convolutional Generative Adversarial Networks (DCGAN) based data augmentation method to overcome the issue of data imbalance. Next, a ConvNeXt-based method extracts the features from the input data. Finally, an optimized Enhanced Elman Spike Neural Network (EESNN) based deep learning is utilized for malware recognition and classification. Using two distinct datasets— MaleVis and Malimg— the generalizability of the suggested model is clearly demonstrated. With an accuracy of 99.24% for MaleVis and 99.31% for the Malimg dataset, the suggested strategy demonstrated excellent results and surpassed all other existing methods. It illustrates how the suggested strategy outperforms alternative models and offers numerous benefits. Show more
Keywords: IIoT, deep learning, ConvNeXt, Malimg, EESNN, DCGAN, MaleVis
DOI: 10.3233/JIFS-234897
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-17, 2024
Authors: Mi, Xiaodong | Luo, Qifang | Zhou, Yongquan
Article Type: Research Article
Abstract: Panchromatic and multi-spectral image fusion, called panchromatic sharpening, is the process of combining the spatial and spectral information of the source image into the fused image to give the image a higher spatial and spectral resolution. In order to improve the spatial resolution and spectral information quality of the image, an adaptive multi-spectral image fusion method based on an improved arithmetic optimization algorithm is proposed. This paper proposed improved arithmetic optimization algorithm, which uses dynamic stochastic search technique and oppositional learning operator, to perform local search and behavioral complementation of population individuals, and to improve the ability of population individuals …to jump out of the local optimum. The method combines adaptive methods to calculate the weights of linear combinations of panchromatic and multi-spectral gradients to improve the quality of fused images. This study not only improves the quality and effect of image fusion, but also focuses on optimizing the operation efficiency of the algorithm to have real-time and high efficiency. Experimental results show that the proposed method exhibits strong performance on different datasets, improves the spatial resolution and spectral information quality of the fused images, and has good adaptability and robustness. The source code is available at: https://github.com/starboot/IAOA-For-Image-Fusion . Show more
Keywords: Image fusion, multi-spectral image, panchromatic image, oppositional learning operator, arithmetic optimization algorithm, meta-heuristic
DOI: 10.3233/JIFS-235607
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-33, 2024
Authors: Premalatha, G. | Chandramani, Premanand V. | Panimalar, K.
Article Type: Research Article
Abstract: Gait analysis is a widely used technique for passive human identification and tracking, with potential applications in security and surveillance systems. However, existing gait recognition methods face challenges in handling changing angles and uncertain features. In this paper, we propose a novel gait recognition approach that leverages real-time spatio-temporal gait features, including step length, gait cycle, height, cadence, swing ratio, and foot length. We apply the Extreme Learning Machines (ELM) algorithm for classification, which has been shown to be effective in various applications due to its fast-learning speed and good generalization performance. To further enhance the recognition rate, we introduce …an evolutionary BAT-optimized ELM algorithm that addresses the instability issue in ELM. The proposed BAT-ELM algorithm can optimize the hidden nodes and weights of ELM, which leads to improved efficiency in recognizing gait from multiple view angles ranging from 0° to 180°. Our comprehensive analysis of the proposed approach indicates that it outperforms other reported algorithms in terms of recognition rate and efficiency. Our work demonstrates the effectiveness of combining real-time spatio-temporal gait features with the BAT-ELM algorithm for gait recognition. The proposed approach has potential applications in various fields, including security and surveillance systems, healthcare, and robotics. Our findings highlight the importance of leveraging evolutionary algorithms to optimize machine learning models and achieve better performance in complex recognition tasks. Show more
Keywords: Spatio-temporal feature, BAT, extreme learning machines, gait cycle
DOI: 10.3233/JIFS-210522
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2024
Authors: Ren, Yonghui | Shi, Yan | Li, Chenglin | Jin, Yanxu
Article Type: Research Article
Abstract: Robots can help people complete repetitive and high-risk tasks, such as industrial production, medical care, environmental monitoring, etc. The control system of robots is the key to their ability to complete tasks, and studying robot control systems is of great significance. This article used Convolutional Neural Network (CNN) and Robotic Process Automation (RPA) technologies to optimize and train the robot control system and constructed a robot control system. This article conducts perception and decision-making experiments and execution experiments in the experimental section. According to the experimental results, it can be concluded that the average image recognition accuracy of the robot …control system in perception and decision-making experiments was 94.62% . The average decision accuracy was 87.5%, and the average time efficiency was 176 seconds. During the execution of the experiment, the deviation of the motion trajectory shall not exceed 5 cm, and the oscillation amplitude shall not exceed 6°; the distance from the obstacle shall not exceed 20 cm, and the movement speed shall not exceed 0.6 m/s; the operating time shall not exceed 25 hours, and the number of faults shall not exceed 0.2 times per hour, all within the normal range. The robot control system based on Deep Learning (DL) and RPA has broad application prospects and research value, which would bring new opportunities and challenges to the development and application of robot technology. Show more
Keywords: Robot control system, Robotic Process Automation (RPA), Convolutional Neural Network (CNN), Deep Learning (DL)
DOI: 10.3233/JIFS-233056
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-11, 2024
Authors: Fan, Lin | Wang, Wenli
Article Type: Research Article
Abstract: The ability, interest, and prior accomplishments of students with varying proficiency levels all impact how they learn English. Exact validation is essential for facilitating efficient evaluation and training models. The research’s innovative significance resides in incorporating personal attributes, progressive appraisal, and Fuzzy Logic-based appraisal in English language learning. The PA2M model, which addresses the shortcomings of existing models, offers a thorough and accurate assessment, enabling personalized recommendations and enhanced teaching tactics for students with varied skill levels. This research proposes the Fuzzy Logic System (FLS)-based Persistent Appraisal Assessment Model (PA2M). Based on the students’ evolving performance and accumulated data, this …model evaluates the students’ English learning capabilities. The model assesses the student’s ability using fuzzification approaches to reduce variations in appraisal verification by linking personal attributes with performance. Mamdani FIS offers a clear and thorough evaluation of student’s English learning capacity within the framework of the appraisal methodology. The inputs are updated utilizing performance and accumulated ability data to improve validation consistently and reduce converge errors. During the fuzzification process, pre-convergence from unavailable appraisal sequences is eliminated. The PA2M approach determines precise improvements and evaluations depending on student ability by merging prior and current data. Several appraisal validations and verifications result in clear fresh suggestions. According to experimental data, the suggested model enhances 9.79% of recommendation rates, 8.79% of appraisal verification, 8.25% of convergence factor, 12.56% error ratio, and verification time with 8.77% over a range of inputs. The PA2M model provides a fresh and useful way to evaluate English learning potential, filling in some gaps in the body of knowledge and practice. Show more
Keywords: Big data, English learning, fuzzy logic system, student ability
DOI: 10.3233/JIFS-232619
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-16, 2024
Authors: Zou, Yu | Fu, Deyu | Mo, Honghuai | Chen, Henglong | Wang, Deyin
Article Type: Research Article
Abstract: Foreign objects identification in the distribution network is an important link in the security of electric power, and is of great significance to the normal transportation of electric power. At present, a lot of equipment in the distribution network is in the open air environment, facing a large number of foreign interference. These foreign objects not only bring potential safety hazards to the distribution network, but also easily lead to short circuit, causing power supply difficulties within the region. Therefore, the research first constructs an optimized triplet feature learning model. On this basis, the HOG-SVM depth feature recognition model is …proposed. In HOG-SVM, AM is introduced to improve recognition accuracy. In addition, the research enhances the night vision ability of the model by standardizing the features in the image region block. The results show that the AP of the model is stable at more than 90.54%, the average FPR is 2.21%, and the average FNR is 3.17% . The performance of HOG-SVM is significantly better than that of traditional SVM. It verifies the contribution of this research in the field of foreign object recognition and application value in ensuring the security of distribution network. Show more
Keywords: Distribution network, foreign objects, depth characteristics, attention
DOI: 10.3233/JIFS-237868
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-14, 2024
Authors: Yi, Lingzhi | Peng, Xinlong | Fan, Chaodong | Wang, Yahui | Li, Yunfan | Liu, Jiangyong
Article Type: Research Article
Abstract: Reliable and accurate short-term forecasting of residential load plays an important role in DSM. However, the high uncertainty inherent in single-user loads makes them difficult to forecast accurately. Various traditional methods have been used to address the problem of residential load forecasting. A single load forecast model in the traditional method does not allow for comprehensive learning of data characteristics for residential loads, and utilizing RNNs faces the problem of long-term memory with vanishing or exploding gradients in backpropagation. Therefore, a gated GRU combined model based on multi-objective optimization is proposed to improve the short-term residential load forecasting accuracy in …this paper. In order to demonstrate the effectiveness, GRUCC-MOP is first experimentally tested with the unimproved model to verify the model performance and forecasting effectiveness. Secondly the method is evaluated experimentally with other excellent forecasting methods: models such as DBN, LSTM, GRU, EMD-DBN and EMD-MODBN. By comparing simulation experiments, the proposed GRU combined model can get better results in terms of MAPE on January, April, July, and November load data, so this proposed method has better performance than other research methods in short-term residential load forecasting. Show more
Keywords: Short-term residential load forecasting, gate recurrent unit, multi-objective optimization algorithm, deep learning
DOI: 10.3233/JIFS-237189
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-18, 2024
Authors: Zhang, Jianhua | Liu, Chan | Geng, Na | Zhang, Yixuan | Yang, Liqiang
Article Type: Research Article
Abstract: An improved Ant Colony Optimization (ACO) algorithm, named IACO, is proposed to address the inherent limitation of slow convergence, susceptibility to local optima and excessive number of inflection in traditional ACO when solving path planning problems. To this end, firstly, the search direction number is expanded from 4 or 8 into 32; Secondly, the distance heuristic information is replaced by an area heuristic function, which deviated from the traditional approach that only considers pheromone information between two points; Then, the influence of path angle and number of turns is taken into account in the local pheromone update. Additionally, a reward …and punishment mechanism is employed in the global pheromone update to adjust the pheromone concentrations of different paths; Furthermore, an adaptive update strategy for pheromone volatility factor adaptive is proposed to expand the search range of the algorithm. Finally, simulation experiments are conducted under various scenarios to verify the superiority and effectiveness of the proposed algorithm. Show more
Keywords: Ant colony optimization, mobile robot, path planning, search direction, area-inspired, grid map
DOI: 10.3233/JIFS-238095
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-18, 2024
Authors: Sangeetha, M. | Nimala, K.
Article Type: Research Article
Abstract: NLP, or natural language processing, is a subfield of AI that aims to equip computers with the ability to understand and analyze human language. Sentiment analysis is a widely used application of NLP, particularly for examining attitudes expressed in online conversations. Nevertheless, many social media comments are written in languages that are not native to the authors, making sentiment analysis more difficult, especially for languages with limited resources, such as Tamil. To tackle this issue, a code-mixed and sentiment-annotated corpus in Tamil and English was created. This article will explain how the corpus was established, including the process of data …collection and the assignment of polarities. The article will also explore the agreement between annotators and the results of sentiment analysis performed on the corpus. This work signifies various performance metrics such as precision, recall, support, and F1-score for the transformer-based model such as BERT, RoBerta, and XLM-RoBerta. Among the various models, XLM-Robert shows slightly significant positive results on the code-mixed corpus when compared to the state of art models. Show more
Keywords: Sentiment analysis, Tamil-English Code-mix, natural language processing, corpus, grammar rule
DOI: 10.3233/JIFS-236971
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2024
Authors: Yang, Jingling | Chen, Liren | Chen, Huayou | Liu, Jinpei | Han, Bing
Article Type: Research Article
Abstract: The conventional approaches to constructing Prediction Intervals (PIs) always follow the principle of ‘high coverage and narrow width’. However, the deviation information has been largely neglected, making the PIs unsatisfactory. For high-risk forecasting tasks, the cost of forecast failure may be prohibitive. To address this, this work introduces a multi-objective loss function that includes Prediction Interval Accumulation Deviation (PIAD) within the Lower Upper Bound Estimation (LUBE) framework. The proposed model can achieve the goal of ‘high coverage, narrow width, and small bias’ in PIs, thus minimizing costs even in cases of prediction failure. A salient feature of the LUBE framework …is its ability to discern uncertainty without explicit uncertainty labels, where the data uncertainty and model uncertainty are learned by Deep Neural Networks (DNN) and a model ensemble, respectively. The validity of the proposed method is demonstrated through its application to the prediction of carbon prices in China. Compared with conventional uncertainty quantification methods, the improved interval optimization method can achieve narrower PI widths. Show more
Keywords: Prediction interval, uncertainty prediction, deep neural networks, carbon price
DOI: 10.3233/JIFS-237524
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-16, 2024
Authors: Shakkeera, L. | Dhiyanesh, B. | Asha, A. | Kiruthiga, G.
Article Type: Research Article
Abstract: To address this storage issue, we propose a Content-Aware Deduplication Clustering Analysis for Cloud Storage Optimization (CADC-FPRLE) based on a file partitioning running length encoder. At first, preprocessing was done by indexing, counting terms, cleansing, and tokenizing. Further multi-objective clustering points are analysed based on the bisecting divisible partition block, which divides a set of documents. The count terms are filtered from the divisible blocks and make up the count terms content block. Using Content-Aware Multi-Hash Ensemble Clustering (CAMH-EC) to group the similar blocks into clusters. This creates a high-dimensional Euclidean interval to create the number of clusters, and points …are performed randomly to set the initial collection. Then, the Magnitude Vector Space Rate (MVSR) estimates the similarity distance between the groups to select the highest scatter value content for indexing. Finally, the Running Block Parity Encoder (RBPE) generates similarity parity in order to reduce the content to a redundant, singularized file in order to optimise storage. This implementation proves a higher level of storage optimization compared to the previous system than other methods. Show more
Keywords: Data deduplication, semantic analysis, cloud storage, magnitude vector space, cluster analysis, running length encoder
DOI: 10.3233/JIFS-231223
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-13, 2024
Authors: Saichand, N. Venkata | Naik, S. Gopiya
Article Type: Research Article
Abstract: Epilepsy is considered a most general neurological disorder related to brain activity disruption. In epileptic seizures detection and classification, EEG (Electroencephalogram) measurements that record the brain’s electrical activities are used frequently. Generally, physicians investigate the abnormalities in the brain. However, this technique is time-consuming, faced complexity in seizure detection, and poor consistency because of data imbalance. To overcome these difficulties, Improved Empirical Mode Decomposition for feature extraction and Improved Weight Updated KNN (K-Nearest Neighbor) algorithm for classification are proposed. In the case of pre-processing, a rule-based filter, namely a wiener scalar filter with integer wavelet transform is used for multiple …channels conversion and further signal to noise ratio is increased. Further in feature extraction, better features are extracted using an improved empirical mode decomposition-based bandpass filter. By using the Improved Weight updated KNN, feature extracted samples are classified incorrect manner, avoiding data imbalance issues. Feature vectors’ effective classification is performed attains higher computational speed and sensitivity. The EEG input signal of the proposed study utilizing the BONN dataset and different performance metrics such as accuracy, sensitivity, specificity, recall, f-score, and error values were performed and compared with various existing studies. From the results, it is clear that the proposed method provides effective detection for seizure and non-seizure patients compared with existing studies. Show more
Keywords: Seizure detection, bandpass filter, rule-based filter, improved empirical mode decomposition, improved weight updated KNN
DOI: 10.3233/JIFS-222960
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-14, 2024
Authors: Guo, Sheng | Tan, Mian | Cai, Shan | Zhang, Zaijun | Liang, Yihui | Feng, Hongxi | Zou, Xue | Wang, Lin
Article Type: Research Article
Abstract: Although facial expression recognition (FER) has a wide range of applications, it may be difficult to achieve under local occlusion conditions which may result in the loss of valuable expression features. This issue has motivated the present study, as a part of which an effective multi-feature cross-attention network (MFCA-Net) is proposed. The MFCA-Net consists of a two-branch network comprising a multi-feature convolution module and a local cross-attention module. Thus, it enables decomposition of facial features into multiple sub-features by the multi-feature convolution module to reduce the impact of local occlusion on facial expression feature extraction. In the next step, the …local cross-attention module distinguishes between occluded and unoccluded sub-features and focuses on the latter to facilitate FER. When the MFCA-Net performance is evaluated by applying it to three public large-scale datasets (RAF-DB, FERPlus, and AffectNet), the experimental results confirm its good robustness. Further validation is performed on a real FER dataset with local occlusion of the face. Show more
Keywords: Facial expression recognition, deep convolution, multi-feature convolution module, local cross-attention module
DOI: 10.3233/JIFS-233748
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-16, 2024
Authors: Wang, Lai-Wang | Hung, Chen-Chih
Article Type: Research Article
Abstract: In response to the low efficiency and poor quality of current seed optimization algorithms for multi-threshold image segmentation, this paper proposes the utilization of the normal distribution in the cluster distribution mathematical model, the Levy flight mechanism, and the differential evolution algorithm to address the deficiencies of the seed optimization algorithm. The main innovation lies in applying the BBO algorithm to image multi threshold segmentation, providing a new perspective and method for image segmentation tasks. The second significant progress is the combination of Levy flight dynamics and differential evolution algorithm (DEA) to improve the BBO algorithm, thereby enhancing its performance …and image segmentation quality. Therefore, a multi-threshold image segmentation model based on the optimized seed optimization algorithm is developed. The experimental results showed that on the function f1, the iteration of the improved seed optimization algorithm was 53, the Generational Distance value was 0.0020, the Inverted Generational Distance value was 0.098, and the Spacing value was 0.051. Compared with the other two algorithms, the improved seed optimization algorithm has better image segmentation performance and clearer image segmentation details. In summary, compared with existing multi-threshold image segmentation methods, the proposed multi-threshold image segmentation model based on the improved seed optimization algorithm has a better image segmentation effect and higher efficiency, can significantly improve the quality of image segmentation, has positive significance for the development of image processing technology, and also provides references for the improvement and application of optimization algorithms. Show more
Keywords: Seed optimization algorithm, differential evolution algorithm, image segmentation, levy flight mechanism
DOI: 10.3233/JIFS-237994
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-22, 2024
Authors: Duan, Wenbiao | Yang, Mingjin | Sun, Weiliang | Xia, Mingmin | Zhu, Hui | Gu, Chijiang | Zhang, Haiqiang
Article Type: Research Article
Abstract: OBJECTIVE: A comprehensive evaluation of studies using DNA microarray datasets for screening and identifying key genes in gastric cancer is the goal of this systematic review and meta-analysis. To better understand the molecular environment associated with stomach cancer, this study aims to provide a quantitative synthesis of findings. PURPOSE: Using DNA microarray databases in a systematic manner, this study aims to analyze gastric cancer (GC) screening and gene identification efforts. Through a literature review spanning 2002–2022, this research aims to identify key genes associated with GC and develop strategies for screening and prognosis based on these …findings. METHODS: The following databases were searched extensively: Science Direct, NCKI, Web of Science, Springer, and PubMed. Fifteen studies met the inclusion and exclusion criteria; 10,134 tissues served as controls and 11,724 as GCs. The levels of critical genes, including COL1A1, COL1A2, THBS2, SPP1, SPARC, COL6A3, and COL3A1, were compared in normal and GC tissues. Rev Man 5.3 was used to do the meta-analysis. While applying models with fixed or random effects, 95% confidence intervals and weighted mean differences were computed. RESULTS According to the meta-analysis, GC tissues exhibited substantially elevated levels of important genes when contrasted with the control group. In particular, there were statistically significant increases in COL1A1 (MD = 2.43, 95% CI: 1.84–3.02), COL1A2 (MD = 2.75, 95% CI: 1.09–4.41), THBS2 (MD = 2.54, 95% CI: 1.66–3.41), SPP1 (MD = 3.64, 95% CI: 3.40–3.88), SPARC (MD = 1.57, 95% CI: 0.37–2.77), COL6A3 (MD = 2.31, 95% CI: 2.02–2.60), and COL3A1 (MD = 2.21, 95% CI: 1.59–2.82). CONCLUSIONS: The COL1A1, THBS2, SPP1, COL6A3, and COL3A1 genes were shown to have potential use in germ cell cancer screening and prognosis, according to this research. Clinical assessment and prognosis of heart failure patients may be theoretically supported by the results of this study. Show more
Keywords: DNA microarray database, gastric cancer, key genes, meta-analysis
DOI: 10.3233/JIFS-236416
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-14, 2024
Authors: Li, Tao | Zhang, Zhongyu | Tao, Zhigang | Jia, Xinyu | Wang, Xiaolong | Wang, Jian
Article Type: Research Article
Abstract: Rock crack is one of the main factors responsible for rock failure. Uniaxial compression creep tests are performed using acoustic emission techniques, a high-sensitivity, non-radiative, non-destructive testing method to understand the influence of crack number on the precursor characteristics of short-term creep damage in the fractured rock mass. Based on the Grassberger-Procaccia (G-P) algorithm, the calculation step size for the correlation dimension value (D 2 ) of the acoustic emission ringing count rate is consistent with that for the acoustic emission b -value. The influence of the number of pre-cracks on the Acoustic emission precursor characteristics of red sandstone …creep is analyzed. The results show that near the destabilization of the specimen, the Acoustic emission accumulative ringing count surges in a stepwise manner, the Acoustic emission b -value decreases, the D 2 -value increases, the Acoustic emission amplitude shows high intensity and high frequency, and the ringing count increases sharply, all with the characteristics of failure precursors. During the accelerated creep stage of the specimens, with the increase of pre-cracks number, the precursory time points of acoustic emission b -value and D 2 -value advance, and their acoustic emission ringing counts increase sharply. Show more
Keywords: Acoustic emission, b-value, correlation dimension value (D2), precursor information, pre-cracks
DOI: 10.3233/JIFS-238964
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-16, 2024
Authors: Hou, Xiaoyu | Luo, Chao | Gao, Baozhong
Article Type: Research Article
Abstract: Candlesticks are widely used as an effective technical analysis tool in financial markets. Traditionally, different combinations of candlesticks have formed specific bullish/bearish patterns providing investors with increased opportunities for profitable trades. However, most patterns derived from subjective expertise without quantitative analysis. In this article, combining bullish/bearish patterns with ensemble learning, we present an intelligent system for making stock trading decisions. The Ensemble Classifier through Multimodal Perturbation (ECMP) is designed to generate a diverse set of precise base classifiers to further determine the candlestick patterns. It achieves this by: first, introducing perturbations to the sample space through bootstrap sampling; second, employing …an attribute reduction algorithm based on neighborhood rough set theory to select relevant features; third, perturbing the feature space through random subspace selection. Ultimately, the trading decisions are guided by the classification outcomes of this procedure. To evaluate the proposed model, we apply it to empirical investigations within the context of the Chinese stock market. The results obtained from our experiments clearly demonstrate the effectiveness of the approach. Show more
Keywords: Trading system, ensemble learning, multimodal perturbation method, neighborhood rough set theory
DOI: 10.3233/JIFS-237087
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-19, 2024
Authors: Zhao, Bin | Cao, Wei | Zhang, Jiqun | Gao, Yilong | Li, Bin | Chen, Fengmei
Article Type: Research Article
Abstract: Aiming at the issue that the current click-through rate prediction methods ignore the varying impacts of different input features on prediction accuracy and exhibit low accuracy when dealing with large-scale data, a click-through rate prediction method (GBIFM) which combines Gradient Boosting Decision Tree (GBDT) and Input-aware Factorization Machine (IFM) is proposed in this paper. The proposed GBIFM method employs GBDT for data processing, which can flexibly handle various types of data without the need for one-hot encoding of discrete features. An Input-aware strategy is introduced to refine the weight vector and embedding vector of each feature for different instances, adaptively …learning the impact of each input vector on feature representation. Furthermore, a fully connected network is incorporated to capture high-order features in a non-linear manner, enhancing the method’s ability to express and generalize complex structured data. A comprehensive experiment is conducted on the Criteo and Avazu datasets, the results show that compared to typical methods such as DeepFM, AFM, and IFM, the proposed method GBIFM can increase the AUC value by 10% –12% and decrease the Logloss value by 6% –20%, effectively improving the accuracy of click-through rate prediction. Show more
Keywords: Click-through rate estimation, GBIFM, GBDT, IFM
DOI: 10.3233/JIFS-234713
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-13, 2024
Authors: Wang, Shuo | Yang, Jing | Yang, Yue
Article Type: Research Article
Abstract: Personalized recommendation systems fundamentally assess user preferences as a reflection of their emotional responses to items. Traditional recommendation algorithms, focusing primarily on numerical processing, often overlook emotional factors, leading to reduced accuracy and limited application scenarios. This paper introduces a collaborative filtering recommendation method that integrates features of facial information, derived from emotions extracted from such data. Upon user authorization for camera usage, the system captures facial information features. Owing to the diversity in facial information, deep learning methods classify these features, employing the classification results as emotional labels. This approach calculates the similarity between emotional and item labels, reducing …the ambiguity inherent in facial information features. The fusion process of facial information takes into account the user’s emotional state prior to item interaction, which might influence the emotions generated during the interaction. Variance is utilized to measure emotional fluctuations, thereby circumventing misjudgments caused by sustained non-interactive emotions. In selecting the nearest neighboring users, the method considers not only the similarity in user ratings but also in their emotional responses. Tests conducted using the Movielens dataset reveal that the proposed method, modeling facial features, more effectively aligns recommendations with user preferences and significantly enhances the algorithm’s performance. Show more
Keywords: Collaborative filtering algorithm, facial information features, emotional factors, non-interactive emotion
DOI: 10.3233/JIFS-232718
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-20, 2024
Authors: Zhai, Shanshan | Fan, Jianping | Liu, Lin
Article Type: Research Article
Abstract: Neutrosophic cubic set (NCS) can process complex information by choosing both interval value and single value membership and indeterminacy and falsehood components. The aggregation operators based on Aczel-Alsina t-norm and t-corm are quite effective for evaluating the interrelationship among attributes. The purpose of this paper is to diagnose the interrelationship among attributes with neutrosophic cubic information, and propose a multi-attribute decision-making(MADM) method for supplier selection problem with unknown weight under neutrosophic cubic environment. We defined neutrosophic cubic Aczel-Alsina (NC-AA) operator and neutrosophic cubic Aczel–Alsina weighted arithmetic average (NCAAWAA) operator, then we discussed various important results and some properties of the …proposed operators. Additionally, we proposed a MADM method under the presence of the NC-AAWAA operator. When the weights of attributes are unknown, we use the MEREC method to determine the weights. Later, the NC-AAWAA operator and MEREC method are applied to address the supplier selection problem. Finally, a sensitivity analysis and a comparative analysis are conducted to illustrate the stability and superiority of the proposed method. The results show the NC-AAWAA operator can handle the interrelationship among complex information more effectively, and MEREC method can weight the attributes based on the removal effect of a neutrosophic cubic attribute. Show more
Keywords: Multi-attribute decision-making (MADM), neutrosophic cubic set (NCS), Aczel-Alsina aggregation operators, MEREC method
DOI: 10.3233/JIFS-235274
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-22, 2024
Authors: Hong, Yuntao
Article Type: Research Article
Abstract: Obsessive-compulsive disorder (OCD) is a chronic disease and psychosocial disorder that significantly reduces the quality of life of patients and affects their personal and social relationships. Therefore, early diagnosis of this disorder is of particular importance and has attracted the attention of researchers. In this research, new statistical differential features are used, which are suitable for EEG signals and have little computational load. Hilbert-Huang transform was applied to EEGs recorded from 26 OCD patients and 30 healthy subjects to extract instant amplitude and phase. Then, modified mean, variance, median, kurtosis and skewness were calculated from amplitude and phase data. Next, …the difference of these statistical features between various pairs of EEG channels was calculated. Finally, different scenarios of feature classification were examined using the sparse nonnegative least squares classifier. The results showed that the modified mean feature calculated from the amplitude and phase of the interhemispheric channel pairs produces a high accuracy of 95.37%. The frontal lobe of the brain also created the most distinction between the two groups among other brain lobes by producing 90.52% accuracy. In addition, the features extracted from the frontal-parietal network produced the best classification accuracy (93.42%) compared to the other brain networks examined. The method proposed in this paper dramatically improves the accuracy of EEG classification of OCD patients from healthy individuals and produces much better results compared to previous machine learning techniques. Show more
Keywords: Obsessive-compulsive disorder (OCD), Electroencephalogram (EEG), Hilbert-Huang transform, statistical features, classification
DOI: 10.3233/JIFS-237946
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-13, 2024
Authors: Zhao, Xixi | Gu, Liang | Duan, Xiaorong | Wang, Liguo | Li, Zhenxi
Article Type: Research Article
Abstract: Cloud storage attribute libraries usually store a large amount of sensitive data such as personal information and trade secrets. Attackers adopt diverse and complex attack methods to target the cloud storage attribute database, which makes the defense work more challenging. In order to realize the secure storage of information, an attribute based cloud storage anti-attack algorithm based on dynamic authorization access is proposed. According to the characteristic variables of the sample, the data correlation matrix is calculated, and the principal component analysis method is adopted to reduce the dimension of the data, build the anti-attack code model, simulate the dynamic …authorization access rights, and calculate the packet loss rate according to the anti-attack flow. Design the initialization stage, cluster stage and cluster center update stage to realize the attack prevention of cloud storage attribute database. The experimental results show that the proposed algorithm can accurately classify the anti-attack code, has good packet processing ability, relatively short page request time, and anti-attack success rate is higher than 90%, which can effectively ensure the stability of the algorithm. Show more
Keywords: Dynamic authorization access, cloud storage attributes, basic anti-attack algorithm, anti-attack code model, access permissions
DOI: 10.3233/JIFS-237409
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-10, 2024
Authors: Mahendran, S. | Gomathy, B.
Article Type: Research Article
Abstract: This study addresses the escalating energy demands faced by global industries, exerting pressure on power grids to maintain equilibrium between supply and demand. Smart grids play a pivotal role in achieving this balance by facilitating bidirectional energy flow between end users and utilities. Unlike traditional grids, smart grids incorporate advanced sensors and controls to mitigate peak loads and balance overall energy consumption. The proposed work introduces an innovative deep learning strategy utilizing bi-directional Long Short Term Memory (b-LSTM) and advanced decomposition algorithms for processing and analyzing smart grid sensor data. The application of b-LSTM and higher-order decomposition in the analysis …of time-series data results in a reduction of Mean Absolute Percentage Error (MAPE) and Minimal Root Mean Square (RMSE). Experimental outcomes, compared with current methodologies, demonstrate the model’s superior performance, particularly evident in a case study focusing on hourly PV cell energy patterns. The findings underscore the efficacy of the proposed model in providing more accurate predictions, thereby contributing to enhanced management of power grid challenges. Show more
Keywords: Smart grids, deep learning, PV cells, error rate and absolute error, prediction
DOI: 10.3233/JIFS-238850
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-13, 2024
Authors: Ning, Yi | Liu, Meiyu | Guo, Xifeng | Liu, Zhiyong | Wang, Xinlu
Article Type: Research Article
Abstract: Accurate load forecasting is an important issue for safe and economic operation of power system. However, load data often has strong non-stationarity, nonlinearity and randomness, which increases the difficulty of load forecasting. To improve the prediction accuracy, a hybrid short-term load forecasting method using load feature extraction based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and refined composite multi-scale entropy (RCMSE) and improved bidirectional long short time memory (BiLSTM) error correction is proposed. Firstly, CEEMDAN is used to separate the detailed information and trend information of the original load series, RCMSE is used to reconstruct the feature …information, and Spearman is used to screen the features. Secondly, an improved butterfly optimization algorithm (IBOA) is proposed to optimize BiLSTM, and the reconstructed components are predicted respectively. Finally, an error correction model is constructed to mine the hidden information contained in error sequence. The experimental results show that the MAE, MAPE and RMSE of the proposed method are 645 kW, 0.96% and 827.3 kW respectively, and MAPE is improved by about 10% compared with other hybrid models. Therefore, the proposed method can overcome the problem of inaccurate prediction caused by data and inherent defects of models and improve the prediction accuracy. Show more
Keywords: Short-term load forecasting, complete ensemble empirical mode decomposition with adaptivenoise, refined composite multi-scale entropy, improved butterfly optimization algorithm, bidirectional long short time memory neural network
DOI: 10.3233/JIFS-237993
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-18, 2024
Authors: Arulmurugan, A. | Jose Moses, G. | Gandhi, Ongole | Sheshikala, M. | Arthie, A.
Article Type: Research Article
Abstract: In the current scenario, feature selection (FS) remains one of the very important functions in machine learning. Decreasing the feature set (FSt) assists in enhancing the classifier’s accuracy. Because of the existence of a huge quantity of data within the dataset (DS), it remains a colossal procedure for choosing the requisite features out of the DS. Hence, for resolving this issue, a new Chaos Quasi-Oppositional-based Flamingo Search Algorithm with Simulated Annealing Algorithm (CQOFSASAA) has been proffered for FS and for choosing the optimum FSt out of the DSs, and, hence, this lessens the DS’ dimension. The FSA technique can be …employed for selecting the optimal feature subset out of the DS. Generalized Ring Crossover has been as well embraced for selecting the very pertinent features out of the DS. Lastly, the Kernel Extreme Learning Machine (KELM) classifier authenticates the chosen features. This proffered paradigm’s execution has been tested by standard DSs and the results have been correlated with the rest of the paradigms. From the experimental results, it has been confirmed that this proffered CQOFSASAA attains 93.74% of accuracy, 92% of sensitivity, and 92.1% of specificity. Show more
Keywords: Quasi-oppositional, feature selection, Flamingo Search Algorithm, Simulated Annealing, convergence rate
DOI: 10.3233/JIFS-233557
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-12, 2023
Authors: Harikumar, Yedhu | Muthumeenakshi, M.
Article Type: Research Article
Abstract: The Indian stock market is a dynamic, complicated system that is impacted by many different variables, making it difficult to anticipate its future. The utilization of deep learning and optimization techniques to forecast stock market movements has gained popularity in recent years. To foresee the Indian stock market, an innovative approach is presented in this study that combines the Grey Wolf Optimization algorithm with a hybrid Convolutional Neural Network (CNN) and Bi-Directional Long-Short Term Memory (Bi-LSTM) framework. The stock market information is first pre-processed utilizing a CNN to extract pertinent features. The Bi-LSTM system, that is intended to capture the …long-term dependencies and temporal correlations of the stock market statistics, is then fed the CNN’s outcome. The model parameters are then optimized utilizing the Grey Wolf Optimization (GWO) technique, which also increases forecasting accuracy. The findings demonstrate that, in terms of forecasting accuracy, the suggested method outperforms a number of contemporary methods, including conventional time series models, neural networks, and evolutionary algorithms. Thus, the suggested methodology provides an effective way to forecast the Indian stock market by combining deep learning and optimization approaches. Show more
Keywords: Indian stock market, grey wolf optimization, deep learning approach, bi-directional long-short term memory, convolutional neural network
DOI: 10.3233/JIFS-233716
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2023
Authors: Li, Xiaoli | Du, Linhui | Yu, Xiaowei | Wang, Kang | Hu, Yongkang
Article Type: Research Article
Abstract: During the operation of HVAC (Heating, Ventilation, and Air-Conditioning) systems, precise energy consumption prediction plays an important role in achieving energy savings and optimizing system performance. However, the HVAC system is a complex and dynamic system characterized by a large number of variables that exhibit significant changes over time. Therefore, it is inadequate to rely on a fixed offline model to adapt to the dynamic changes in the system that consume tremendous computation time. To solve this problem, a deep neural network (DNN) model based on Just-in-Time learning with hyperparameter R (RJITL) is proposed in this paper to predict …HVAC energy consumption. Firstly, relevant samples are selected using Euclidean distance weighted by Spearman coefficients. Subsequently, local models are constructed using deep neural networks supplemented with optimization techniques to enable real-time rolling energy consumption prediction. Then, the ensemble JITL model mitigates the influence of local features, and improves prediction accuracy. Finally, the local models can be adaptively updated to reduce the training time of the overall model by defining the update rule (hyperparameter R ) for the JITL model. Experimental results on energy consumption prediction for the HVAC system show that the proposed DNN-RJITL method achieves an average improvement of 5.17% in accuracy and 41.72% in speed compared to traditional methods. Show more
Keywords: HVAC, energy consumption, weighted similarity measure, deep neural network, Just-in-Time learning
DOI: 10.3233/JIFS-233544
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-14, 2024
Authors: Maleki, Monavareh | Ebrahimi, Mohamad | Davvaz, B.
Article Type: Research Article
Abstract: The concept of entropy and information gain of BE-algebras in scientific disciplines such as information theory, data science, supply chain and machine learning assists us to calculate the uncertanity of the scientific processes of phenomena. In this respect the notion of filter entropy for a transitive BE-algebra is introduced and its properties are investigated. The notion of a dynamical system on a transitive BE-algebra is introduced. The concept of the entropy for a transitive BE-algebra dynamical system is developed and, its characteristics are considered. The notion of equivalent transitive BE-algebra dynamical systems is defined, and it is proved the fact …that two equivalent BE-algebra dynamical systems have the same entropy. Theorems to help calculate the entropy are given. Specifically, a new version of Kolmogorov– Sinai Theorem has been proved. The study introduces the concept of information gain of a transitive BE-algebra with respect to its filters and investigates its properties. This study proposes the use of filter entropy to approximate the level of risk introduced by a BE-algebra dynamical system. This aim is reached by defining the information gain with respect to the filters of a BE-algebra. This methodology is well developed for use in engineering, especially in industrial networks. This paper proposes a novel approach to assess the quantity of uncertainty, and the impact of information gain of a BE-algebra dynamical system. Show more
Keywords: Generator, transitive BE-algebra, dynamical system, entropy, information gain
DOI: 10.3233/JIFS-232363
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2024
Authors: Yang, Jiyun | Gui, Can
Article Type: Research Article
Abstract: Malware attack is a growing problem on the Android mobile platform due to its popularity and openness. Although numerous malware detection approaches have been proposed, it still remains challenging for malware detection due to a large amount of constantly mutating apps. The opcode, as the most fundamental part of Android app, possesses good resistance against obfuscation and Android version updates. Due to the large number of opcodes, most opcode-based methods employ statistical-based feature selection, which disrupts the correlation and semantic information among opcodes. In this paper, we propose an Android malware detection framework based on sensitive opcodes and deep reinforcement …learning. Firstly, we extract sensitive opcode fragments based on sensitive elements and then encode the features using n -gram. Next, we use deep reinforcement learning to select the optimal subset of features. During the process of handling opcodes, we focus on preserving semantic information and the correlation among opcodes. Finally, our experimental results show an accuracy of 0.9670 by using the 25 opcode features we obtained. Show more
Keywords: Android malware, deep reinforcement learning, feature selection, machine learning
DOI: 10.3233/JIFS-235767
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-10, 2024
Authors: Badshah, Noor | Begum, Nasra | Rada, Lavdie | Ashfaq, Muniba | Atta, Hadia
Article Type: Research Article
Abstract: Joint segmentation and registration of images is a focused area of research nowadays. Jointly segmenting and registering noisy images and images having weak boundaries/intensity inhomogeneity is a challenging task. In medical image processing, joint segmentation and registration are essential methods that aid in distinguishing structures and aligning images for precise diagnosis and therapy. However, these methods encounter challenges, such as computational complexity and sensitivity to variations in image quality, which may reduce their effectiveness in real-world applications. Another major issue is still attaining effective joint segmentation and registration in the presence of artifacts or anatomical deformations. In this paper, a …new nonparametric joint model is proposed for the segmentation and registration of multi-modality images having weak boundaries/noise. For segmentation purposes, the model will be utilizing local binary fitting data term and for registration, it is utilizing conditional mutual information. For regularization of the model, we are using linear curvature. The new proposed model is more efficient to segmenting and registering multi-modality images having intensity inhomogeneity, noise and/or weak boundaries. The proposed model is also tested on the images obtained from the freely available CHOAS dataset and compare the results of the proposed model with the other existing models using statistical measures such as the Jaccard similarity index, relative reduction, Dice similarity coefficient and Hausdorff distance. It can be seen that the proposed model outperforms the other existing models in terms of quantitatively and qualitatively. Show more
Keywords: Image segmentation, image registration, linear curvature (LC), conditional mutual information (CMI), Jaccard similarity index (JSI)
DOI: 10.3233/JIFS-233306
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-16, 2024
Authors: Wang, Tianxiong | Xu, Mengmeng | Yang, Liu | Zhou, Meiyu | Sun, Xin
Article Type: Research Article
Abstract: Kansei Engineering (KE) is a product design method that aims to develop products to meet users’ emotional preferences. However, traditional KE faces the problem that the acquisition of Kansei factors does not represent the real consumers demands based on manual and reports, and using tradition methods to calculate relationship between Kansei factors and specific design elements, which can lead to the omission of key information. To address these problems, this study adopts text mining and backward propagation neural networks (BPNN) to propose a product form design method from a multi-objective optimization perspective. Firstly, Term Frequency-Inverse Document Frequency (TF-IDF) and WordNet …are used to extract key user Kansei requirements from online review texts to obtain more accurate Kansei knowledge. Secondly, the BPNN is used to establish the non-linear relationship between product Kansei factors and specific design elements, and a preference mapping prediction model is constructed. Finally, BPNN is transformed into an iterative prediction value of non-dominated sorting genetic algorithm-II (NSGA-II), and the model is solved through multi-objective evolutionary algorithm (MOEA) to obtain the Pareto optimal solution set that satisfies the user’s multiple emotional needs, and the fuzzy Delphi method is used to obtain the best product form design scheme that meets the user’s multiple emotional images. Using the example of electric bicycle form design show that this proposed method can effectively complete multi-objective product solutions innovation design. Show more
Keywords: Text mining, Back propagation neural network (BPNN), Multi-objective evolutionary algorithm (MOEA), Non-dominated sorting genetic algorithm-II (NSGA-II), Kansei engineering
DOI: 10.3233/JIFS-230668
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-21, 2024
Authors: Jianping, Liu | Yingfei, Wang | Jian, Wang | Meng, Wang | Xintao, Chu
Article Type: Research Article
Abstract: To better understand users’ behavior patterns in web search, numerous click models are proposed to extract the implicit interaction feedback. Most existing click models are heavily based on the implicit information to model user behaviors, ignoring the impact of explicit information between queries and documents in search sessions. In this paper, we fully consider the topic relevance between queries and documents in search sessions and propose a novel topic relevance-aware click model (TRA-CM) for web search. TRA-CM consists of a relevance estimator and an examination predictor. The relevance estimator consists of a topic relevance predictor and a click context encoder. …In the topic relevance predictor, we utilize the pre-trained BERT model to model the content information of queries and documents in search sessions. Meanwhile, we use transformer to encode users’ click behaviors in the click context encoder. We further apply a two-stage fusion strategy to obtain the final relevance scores. The examination predictor estimates the examination probability of each document. We further utilize learnable filters to attenuate log noise and obtain purer input features in both relevance estimator and examination predictor, and investigate different combination functions to integrate relevance scores and examination probabilities into click prediction. Extensive experiment results on two real-world session datasets prove that TRA-CM outperforms existing click models in both click prediction and relevance estimation tasks. Show more
Keywords: BERT, click model, click prediction, deep learning, web search
DOI: 10.3233/JIFS-236894
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-14, 2024
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]